WD Plots A Course To 40TB HDDs With MAMR

9


WD has selected MAMR (Microwave Assisted Magnetic Recording) as its new HDD recording technology, which the company claims can enable up to 40TB HDDs by 2025. WD’s rapid transition to MAMR is somewhat surprising, but the technology has been in development for nearly a decade. It certainly stands in contrast to Seagate’s plans for using the laser-assisted HAMR (Heat Assisted Magnetic Recording) as the route to higher storage density.

The transition to the new recording process isn’t immediate, but WD plans to have initial products shipping by 2019, and it had working demo models this week at its event in San Jose. The improved recording technology is needed to keep HDDs cost-competitive with the surging SSDs, but economics dictate that SSDs will never replace HDDs entirely, especially as the volume of data continues to grow exponentially; WD predicts that HDDs will account for ~90% of data center storage in 2020.

MAMR hard drives will debut in the data center and eventually filter down to NAS and video surveillance HDDs, but unfortunately, WD says that it will not bring the drives to the consumer market. The tactic makes some sense for WD, which also has a large presence in the SSD market due to its SanDisk acquisition. The company acknowledges that HDDs are being replaced quickly in the client space. For instance, if we include data stored worldwide, such as in desktop PCs, laptops, and other devices, WD predicts that only 70% of data will be stored on HDDs in 2020. In either case, it is surprising that WD isn’t planning on bringing higher-capacity MAMR drives to the desktop. We imagine WD will use the existing low-performance SMR (Shingled Magnetic Recording) to extend HDD density in the client market.  

The Background

The HDD has evolved over the last 60 years into smaller devices as the industry shrunk the size of physical components to increase storage density. Shrinking the components, such as disks, heads, and the case, brought about huge improvements, but eventually the industry ran against the practical limits of reducing the size of the mechanical components.   

Not that they didn’t try. The HDD industry spent tremendous time and treasure developing 1-inch HDDs (which debuted in 1999), envisioning that the tiny spinners would make their way into mobile products, such as the then-conceptual smartphone. That didn’t go well, thankfully, and the mobile industry transitioned to flash for those types of applications. In the meantime, the HDD vendors continued to improve recording technology. 

HDDs store data by magnetizing small bits aligned on a platter into tracks, and density improvements come by shrinking the TPI (Tracks Per Inch) and BPI (Bits Per Inch).

In the past, longitudinal recording was the go-to method for recording data on a hard drive. Longitudinal recording aligned the poles of each magnetic element (bit) horizontally.

Shrinking the bits required “stronger” (higher coercivity) materials that could hold the magnetic charge within a smaller volume. Materials with higher coercivity are more thermally stable, which is important due to the superparamagnetic limit. This limit denotes that bits can be spontaneously de-magnetized by local thermal fluctuations if the magnetic regions of the bit are too small, resulting in data loss.

But the write heads of the era could not force enough energy into the smaller and stronger bits without disturbing surrounding bits. With PMR (Perpendicular Magnetic Recording), vertically aligning the poles allows the head to drive more directed energy into the material by routing the magnetic flux through an additional under-layer (see graphic). That enabled the use of “stronger” materials.

Current bits, also known as grains, are ~7nm, but shrinking them further requires even “stronger” materials. Today’s head technology cannot force enough directed energy into the stronger material to “flip” the bits, especially with precision, so an energy-assist technology is needed to write data to the media successfully. 

WD developed a Spin-Torque Oscillator (STO) to reduce the coercivity of the material so the head can impart enough energy into the bits to flip the magnetic state. The STO resides in the center of the recording head and has 10nm multi-layer films consisting of magnetic and non-magnetic material. The head applies DC current to the STO, which in turn creates an electron spin. This rotation creates an electromagnetic field at a microwave frequency (20-40 GHz range), thus reducing the coercivity enough to pump sufficient energy into the stronger bits and flip the magnetic charge. That will eventually allow the company to use 4.5nm grains as the technology evolves.The new writing technique also improves media and track density by writing more well-defined data patterns than PMR or HAMR technologies. PMR’s maximum density is currently predicted to be roughly 1.1 Gbit/inch², but combining it with other new technologies, such as SMR (Shingled Magnetic Recording), boosts the density potential up to 1.4 Gbit/inch2.

WD predicts that it can reach up to 4.5 Tbits/inch2 with MAMR. That enables a path forward to 40TB+ hard drives.

Of course, MAMR isn’t the only option. Both WD and Seagate have extensively researched HAMR (Heat Assisted Magnetic Recording), with the latter planning to deploy the technology in its future products. WD even had working HAMR demo drives at its event, but the technology is much more exotic.

HAMR uses a small laser to heat a tiny portion of the platter (less than 20nm) to 400-700C to lower coercivity and allow the material to be magnetized. The rapid heating and cooling cycles present tremendous challenges that will require new platter and head materials, which increases cost. It also requires wear leveling to ensure uniform wear on the platters, which will require either software changes or embedded intelligence on the drive. In contrast, WD claims that MAMR will utilize existing technologies and materials with minimal changes, creating a plug-and-play solution.

Even more promising, MAMR is interoperable with WD’s other density-improving technologies, such as Damascene heads, helium, and SMR recording. WD led the industry transition to helium drives, and the advantages are a well-traveled subject.

The company also pioneered Damascene head technology, which improves TPI due to its higher-precision writeability. Producing heads, like any other component, is also subject to yield issues. Dry pole heads, the current technology of choice for other HDD vendors, are primarily manufactured by depositing materials and then applying an extensive multi-stage milling process that essentially carves the head out of a chunk of material. Creating a dry pole head requires roughly 1,300 process steps.

Damascene heads, though, are built by creating the head and then filling it with an electroplating process. That allows for more precisely defined features, which boosts performance, and it only adds 300 steps to the process. By contrast, WD says it would require yet another 600 steps to create a HAMR-capable write head, which decreases yields. The improved MAMR head yields are one of the most crucial factors to reigning in cost–it requires roughly three months to create a head in a wafer fab. HAMR write heads also require exotic new features, such as lasers, that increase cost and reduce reliability.

WD also wraps the Damascene heads in a material that focuses the energy on its target, which reduces interference with adjacent tracks and bits. WD can create its own MAMR heads, and it owns the head technology, but it will not comment if it will also use third-party suppliers. 

WD also improved its head positioning technology. Finer control of head positioning becomes paramount as track width decreases. The industry has progressed through several techniques, such as positioning the actuator at the end or middle of the arm, to increase precision. WD’s new micro-actuator adds positioning capabilities at the head itself, thus improving positioning accuracy. WD can also use the heads in tandem with other promising technologies, such as TDMR, which uses multiple read heads to boost the readability of thinner data tracks. WD’s current approach doesn’t require multiple heads, but it could be useful as the technology scales to even smaller tracks in the future.

 

WD contends that MAMR will provide a 4x density improvement over PMR. WD’s MAMR could provide it a cost and time-to-market advantage over Seagate’s HAMR approach, but much of that rests on Seagate’s production timeline. Seagate has committed to releasing HAMR drives, but the company has constantly pushed the timeline further into the future.

Overall, WD’s MAMR technology promises to bring similar performance to typical PMR drives, albeit with small improvements due to enhanced density. It also doesn’t require any changes to the existing storage hierarchy, including hardware and software, or any radical new materials, which always presents supply chain challenges. Most importantly, the company claims its MAMR offers similar reliability characteristics, such as a 550TB/year workload tolerance and 2.5 million hour MTBF within normal operating conditions, and leverages several of its proven technologies.

But as important as reliability is, cost is a crucial factor. WD claims that MAMR drives will feature roughly the same price-per-TB as PMR HDDs, and cost will decline as the technology matures. That’s a critical factor to ensuring the drives are palatable to the high-volume data center/hyperscale target market, but it also ensures that HDDs will remain cost-competitive with SSDs for the foreseeable future, even in the face of ultra-cheap QLC NAND technology.

The drives won’t make it to market until 2019, but all new WD data center drives will feature the technology, which means it will effectively retire PMR for newer drives. That says a lot about the company’s confidence in MAMR and its production scalability. WD claims that production will begin at high volumes immediately upon launch instead of the staggered rollouts we are accustomed to. The company isn’t telling us what capacity the leading models will ship in, but given the capabilities of the new technology, WD could quickly distance itself from competitors. 



Source: TomHardware